How to Install
1. Prep your wall
Smoothen the wall. Fill holes and sand any bumps. Apply 2 coats oil primer to seal the wall. Wipe down your wall with a damp cloth 24 hours prior to installing.
2. Measure
It’s always recommended to measure the wallpaper prior to pasting, if there is any discrepancy, please inform us.
3. Tile Matching
We print wallpapers in panels (width) as per your wall size, check the image below for reference, pls match each tile on floor before starting to paste. By Default each panel would have overlapping (approx.25mm), which is to be cut after pasting.
4. Apply Adhesive
Apply ready wallpaper adhesive paste evenly to the wall and the back of the wallpaper, following the manufacturer's instructions for your specific adhesive. We recommend using Bartoline (Premix) adhesive for best results.
5. Hang the Wallpaper
- Start at left corner and apply the first panel, ensuring it's plumb and level.
- For customised wallpapers, ensure the pattern aligns seamlessly with adjacent panels, overlapping slightly if required by the overlap method.
- Use a roller or scraper to smooth out air bubbles as you go
6. Trim and Clean
- Carefully trim any excess wallpaper at the ceiling, floor, and edges with a sharp cutter & Scale.
- Use a damp sponge to clean away any excess glue from the wallpaper surface and corners.
- Allow the wallpaper to dry completely, ideally in a well-ventilated room at a normal temperature for about 24 hours.
7. Tutorial
Pls check our detailed video on how to install by clicking the link below
